The Best Boat Storage Options There are a few different boat storage options available. The size and length of the boat can be a deciding factor, as well as how the boat is going to be used. For smaller boats, it is easy to store at home if there is enough room. The boat can be kept on a trailer or in a covered area. This is cost-effective if possible. There are other things to consider, for instance, the distance to travel to the water each time the boat is going to be used. Another consideration should be if launching the boat when arriving at the water will be easily done and if there is safe parking for the car and trailer while the boat is out on the water. Different Storage Options A big aspect of boat ownership is how to keep the boat protected and safe when not in use. Typically, there are two options, to begin with, out of the water storage or in the water storage. Within each of these options lies more options of how to store the boat. Dry Storage Out Of The Water Can Include The Following Options: If the boat is small enough, it can be kept on a trailer, or in a covered area, like a garage, at home. The benefit of this is that the boat is near for maintenance and could be transported on the trailer wherever it is going to be used. Another option is dry-stacked storage with the boat going in storage inside a warehouse. Multiple boats are stored at such facilities, and the boats are stacked and removed with forklifts. Storing A Boat In The Water May Include The Following Options: A convenient option for boat storage is keeping it in the marina. The boat is always ready to go with no need for a trailer and maybe a difficult launch. However, a marina slip might need to be purchased. There are more types of storage options available, especially when on dry land. The method of storage depends on what is the best and most convenient for each boat owner.
Keeping a Clean Boat Keeping a clean boat count for more than just cleanliness and having a good looking, shiny boat. It is important towards extending the lifespan of materials that are exposed to natural elements like wind, rain, the sun, and water. Keeping a clean boat is a big part of the basic maintenance of a boat. There are boat valeting companies that offer a variety of cleaning services to help maintain a boat. These valet services can be performed monthly or whenever needed. Services Offered by Boat Valeting Companies A professional washdown will take away all the build-up of surface dirt that happens daily. It will also take care of scuff marks. Attention will be given to windows, fenders, rails, and the removal of all watermarks. A full clean and polish will include all of the above tasks. If the boat is not in the water, the hull and sides can be cleaned from limescale, boot-line stains, and scratches. Compound polishing and waxing will give the boat a first-class gleam. Attention will also be given to vinyl seating, fenders, rails, and windows. A canopy is just as much part of a boat as any other surface and should be part of the cleaning process. This service will include the cleaning and reproofing, as well as any repairs or alterations that might be needed. Teak cleaning and refurbishing will bring back these surfaces to their former glory. This includes deep cleaning to remove scuffs, marks, and stains. Brightening that will restore the natural colour of the teak. And treatment with dressing to restore colour in the teak surfaces. Other services can include: Bilge cleaning of the engine bay and areas below. Anti-fouling is a vital part of boat maintenance. Painting can be done if needed. Crash damage, repairs, and insurance work can be carried out when requested. Gel coat repairs are done and also scratch removals. The services offered can make it much easier to maintain a boat and the cleaning by doing most of the hard work. It is vital to use products that are specifically created to clean each different surface of the boat to the best.
Boatyard Services A boatyard is a place where boats are built and can be repaired when needed. Every boat needs to be checked regularly, and necessary work has to be done yearly. This type of check-up and work is usually done in the winter months to have the boat ready when summer comes. Boatyards are mostly situated near the sea or on a riverside to allow easy access for boats. A boatyard will contain dry docks, slipways, warehouses, great specialised cranes, painting facilities and warehouses. There must be large areas where ships are built. In India, the earliest known boatyards, or then known as dockyards, were built in 2600 BC. These were built on a trade route next to the course of an ancient river. The priority for the creation of these dockyards was to be of service to naval trade. Shipyards also found a place in legends where fleets were built to invade cities and countries. Services Available at Boatyards Boat refurbishment and refitting will include services to newly outfit a boat to a customer’s specifications. This may include: Electronic upgrades to all marine electrical systems, running gear or changing the whole outfit. The service or upgrade of deck hardware. This can include the installing of new hardware when needed. The installing or service of air conditioning and heaters. The overhaul of engines or the fitting of new ones. New decking can improve the look of a boat, but it can also include the use of new, incredibly functional, and great looking products other than wood. Updating a deck layout can benefit any boat, whether it is for relaxing or racing purposes. Designing a new interior can include custom woodwork, new upholstery, and anything that can make a boat home. Advice on the best rigging set up for each different boat. A refit project can also include the installation of the new plumbing or the repair of the existing plumbing. A paint finish will be done with the correct application equipment and facilities to create the correct paint finish. Advice and information about all the services, essentials the boat need, and extras that can be added will be given by experts in the boatbuilding field. Where Can I Find a Boatyard? There are many historic boatyards from as early as 2600 BC built in India, mentioned above. There are also more recent boatyards, and shipyards can be found worldwide in every major port, on riverbanks or near lakes or dams that are used by watercraft.
The Different Types of Boats Boats come in many different shapes and sizes. A boat’s size, style, and shape depend on the purpose it is used for. Different Types of Boats Unpowered boats, also called human-powered craft, include rafts. Rafts are usually meant for travelling one-way, that is, downstream. Other human-powered boats include kayaks, canoes, gondolas, as well as boats that are propelled by a pole. Human-powered means that someone is rowing, or pulling a rope, or using a punt to move forward. Sailboats are propelled by sails filled with blowing wind where the wind then pushes the boat forward. Motorboats are boats that use mechanical means, like an engine, to propel forward. Each boat has a different function and is owned for many different reasons. Boats are used in a variety of ways with lots of different uses depending on what a boat owner bought the boat for. Fishing boats are built exclusively to fish. These boats have strength, durability, and stability qualities to endure any kind of water for fishing. Bigger fishing boats can be part of a fishing fleet, and smaller boats can be for a single fisherman. A dinghy boat can be an inflatable boat of rubber or a small wood, metal, or fibreglass boat that are powered by rowing. It might have a small outboard engine and are also taken with it on camping expeditions or fishing trips. Houseboats come in all different shapes and sizes and offer the experience of living on the water. Motor yacht boats are primarily built for leisure and are usually outfitted in luxury. Lifeboats are small watercraft attached to bigger ships and is used in emergencies. Their main function is to transport passengers to safety if an accident should happen. These are only a few of the boats used today. Depending on where a boat will be used, for instance, the sea, a river, a lake, or a dam, will influence the way the boat is built and outfitted.
